pentevo – /avr/baseconf/trunk/src/zx.h

Rev 1097 – baseconf: - add to rs232: LSR major bit is indicator ...

chrv — Thu, 14 Sep 2023 17:44:54 +0300

chrv – 3 file(s) modified
baseconf:
- add to rs232: LSR major bit is indicator of half-full receivers fifo;
- fix RCtrl+RAlt+Del hard reset.

~ /avr/baseconf/trunk/src/rs232.c
~ /avr/baseconf/trunk/src/zx.c
~ /avr/baseconf/trunk/src/zx.h

Rev 898 – pentevo: changing repo structure

lvd — Sat, 14 Nov 2020 20:52:43 +0300

lvd – 33 file(s) modified
pentevo: changing repo structure

+ /avr/baseconf
+ /avr/baseconf/trunk
+ /avr/baseconf/trunk/build
+ /avr/baseconf/trunk/src
+ /avr/baseconf/trunk/src/atx.c (copied from /avr/current/atx.c@896)
+ /avr/baseconf/trunk/src/atx.h (copied from /avr/current/atx.h@896)
+ /avr/baseconf/trunk/src/depacker_dirty.c (copied from /avr/current/depacker_dirty.c@896)
+ /avr/baseconf/trunk/src/depacker_dirty.h (copied from /avr/current/depacker_dirty.h@896)
+ /avr/baseconf/trunk/src/getfaraddress.h (copied from /avr/current/getfaraddress.h@896)
+ /avr/baseconf/trunk/src/interrupts.c (copied from /avr/current/interrupts.c@896)
+ /avr/baseconf/trunk/src/joystick.c (copied from /avr/current/joystick.c@896)
+ /avr/baseconf/trunk/src/joystick.h (copied from /avr/current/joystick.h@896)
+ /avr/baseconf/trunk/src/kbmap.c (copied from /avr/current/kbmap.c@896)
+ /avr/baseconf/trunk/src/kbmap.h (copied from /avr/current/kbmap.h@896)
+ /avr/baseconf/trunk/src/main.c (copied from /avr/current/main.c@896)
+ /avr/baseconf/trunk/src/main.h (copied from /avr/current/main.h@896)
+ /avr/baseconf/trunk/src/mytypes.h (copied from /avr/current/mytypes.h@896)
+ /avr/baseconf/trunk/src/pins.h (copied from /avr/current/pins.h@896)
+ /avr/baseconf/trunk/src/ps2.c (copied from /avr/current/ps2.c@896)
+ /avr/baseconf/trunk/src/ps2.h (copied from /avr/current/ps2.h@896)
+ /avr/baseconf/trunk/src/rs232.c (copied from /avr/current/rs232.c@896)
+ /avr/baseconf/trunk/src/rs232.h (copied from /avr/current/rs232.h@896)
+ /avr/baseconf/trunk/src/rtc.c (copied from /avr/current/rtc.c@896)
+ /avr/baseconf/trunk/src/rtc.h (copied from /avr/current/rtc.h@896)
+ /avr/baseconf/trunk/src/spi.c (copied from /avr/current/spi.c@896)
+ /avr/baseconf/trunk/src/spi.h (copied from /avr/current/spi.h@896)
+ /avr/baseconf/trunk/src/tape.c (copied from /avr/current/tape.c@896)
+ /avr/baseconf/trunk/src/tape.h (copied from /avr/current/tape.h@896)
+ /avr/baseconf/trunk/src/version.c (copied from /avr/current/version.c@896)
+ /avr/baseconf/trunk/src/version.h (copied from /avr/current/version.h@896)
+ /avr/baseconf/trunk/src/zx.c (copied from /avr/current/zx.c@896)
+ /avr/baseconf/trunk/src/zx.h (copied from /avr/current/zx.h@896)
+ /fpga/trdemu/trunk/quartus/Makefile (copied from /fpga/baseconf/trunk/quartus/Makefile@897)

Rev 672 – Update: * - Add any (left or right) Ctrl,Alt ...

chrv — Sun, 05 Oct 2014 11:34:20 +0400

chrv – 9 file(s) modified
Update:
* - Add any (left or right) Ctrl,Alt keys and exclude mapped Ctrl,Alt keys from Ctrl-Alt-Del functionality (reset).
* - Add reading state of LCTRL,RCTRL,LALT,RALT,LSHIFT,RSHIFT,F12 keyboard states from RTC register D (bits 0-6).
* - Add reading state of NUM LOCK LED from RTC register C (bit 0).

~ /avr/current/default/core.hex
~ /avr/current/default/zxevo_fw.bin
~ /avr/current/interrupts.c
~ /avr/current/main.h
~ /avr/current/rtc.c
~ /avr/current/rtc.h
~ /avr/current/zx.c
~ /avr/current/zx.h
~ /docs/zxevo_base_configuration.odt

Rev 608 – added 60Hz video mode

ddp — Tue, 18 Jun 2013 23:03:23 +0400

ddp – 10 file(s) modified
added 60Hz video mode

~ /avr/current/default/core.hex
~ /avr/current/default/zxevo_fw.bin
~ /avr/current/main.h
~ /avr/current/zx.c
~ /avr/current/zx.h
~ /fpga/current/quartus/top.rbf
~ /fpga/current/quartus/top.sof
~ /fpga/current/top.v
~ /fpga/current/video/video_sync_v.v
~ /fpga/current/video/video_top.v

Rev 292 – * - "NumLock" switch mode to beeper/pwm or tapeout ("NumLock" ...

chrv — Sat, 27 Nov 2010 19:02:18 +0300

chrv – 12 file(s) modified
* - "NumLock" switch mode to beeper/pwm or tapeout ("NumLock" led light on tapeout mode).
* - Create full translation map (0x00-0x7f for extended scan codes).

update compatible monitors list

~ /avr/current/default/core.hex
~ /avr/current/default/zxevo_fw.bin
~ /avr/current/kbmap.c
~ /avr/current/kbmap.h
~ /avr/current/main.c
~ /avr/current/main.h
~ /avr/current/ps2.c
~ /avr/current/rs232.c
~ /avr/current/rtc.c
~ /avr/current/zx.c
~ /avr/current/zx.h
~ /docs/supported_monitors.odt

Rev 263 – some rs232 modifications (baseconf) add realease description to odt

chrv — Sun, 17 Oct 2010 23:54:32 +0400

chrv – 7 file(s) modified
some rs232 modifications (baseconf)
add realease description to odt

~ /avr/current/default/zxevo_fw.bin
~ /avr/current/main.c
~ /avr/current/rs232.c
~ /avr/current/rs232.h
~ /avr/current/zx.c
~ /avr/current/zx.h
~ /docs/zxevo_base_configuration.odt

Rev 219 – - "F9","F10","F11" on PS/2 keyboard not used for reset function. ...

chrv — Tue, 17 Aug 2010 23:12:50 +0400

chrv – 11 file(s) modified
- "F9","F10","F11" on PS/2 keyboard not used for reset function.
- "F12" on PS/2 keyboard worked like soft reset key. Short press (<5sec) - soft reset, long press (5sec) - hard reset and switch off ATX power.
- "Ctrl-Alt-Del" on PS/2 keyboard reset ZX (hard reset). If all keys is mapped to ZX keyboard - function not work.
- Create translating map (PS/2 to ZX keyboard) in eeprom (default in progmem).
- Fix PS/2 mouse and keyboard send mode (without 'delay' function).
- Support load from tape input.

~ /avr/current/atx.c
~ /avr/current/atx.h
~ /avr/current/default/core.hex
~ /avr/current/default/Makefile
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/interrupts.c
~ /avr/current/main.c
~ /avr/current/main.h
~ /avr/current/ps2.c
~ /avr/current/zx.c
~ /avr/current/zx.h

Rev 217 – CHRV: added tape iface

lvd — Wed, 04 Aug 2010 00:23:27 +0400

lvd – 12 file(s) modified
CHRV: added tape iface

~ /avr/current/default/core.hex
~ /avr/current/default/version.txt
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/interrupts.c
~ /avr/current/main.c
~ /avr/current/main.h
~ /avr/current/pins.h
~ /avr/current/ps2.c
~ /avr/current/zx.h
~ /fpga/current/quartus/top.qsf
~ /fpga/current/quartus/top.rbf
~ /fpga/current/quartus/top.sof

Rev 163 – - "Print Screen" PS2 keyboard key set NMI on ZX. ...

chrv — Sun, 21 Mar 2010 18:41:26 +0300

chrv – 10 file(s) modified
- "Print Screen" PS2 keyboard key set NMI on ZX.
- Soft reset (Z80 only) to service (0) page if pressed "softreset" key <5 seconds.
- documentation

~ /avr/current/atx.c
~ /avr/current/default/core.hex
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/interrupts.c
~ /avr/current/main.h
~ /avr/current/rtc.c
~ /avr/current/zx.c
~ /avr/current/zx.h
+ /docs/zxevo_base_configuration.odt
~ /rom/zxevo.rom

Rev 151 – fix AAA keyboard bug

chrv — Wed, 10 Mar 2010 22:30:40 +0300

chrv – 8 file(s) modified
fix AAA keyboard bug

~ /avr/current/default/core.hex
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/interrupts.c
~ /avr/current/main.c
~ /avr/current/ps2.c
~ /avr/current/rtc.c
~ /avr/current/zx.c
~ /avr/current/zx.h

Rev 129 – - fix Gluk C reg UF bit behaviour (thanks Savelij) ...

chrv — Sun, 21 Feb 2010 22:08:10 +0300

chrv – 9 file(s) modified
- fix Gluk C reg UF bit behaviour (thanks Savelij)
- update comments and headers

~ /avr/current/default/core.hex
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/depacker_dirty.c
~ /avr/current/depacker_dirty.h
~ /avr/current/main.c
~ /avr/current/main.h
~ /avr/current/rtc.c
~ /avr/current/rtc.h
~ /avr/current/zx.h

Rev 119 – more fine tune realkbd

ddp — Sun, 07 Feb 2010 23:42:53 +0300

ddp – 5 file(s) modified
more fine tune realkbd

~ /avr/current/default/core.hex
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/interrupts.c
~ /avr/current/zx.c
~ /avr/current/zx.h

Rev 117 – fine optimize realkbd

ddp — Sun, 07 Feb 2010 16:35:03 +0300

ddp – 6 file(s) modified
fine optimize realkbd

~ /avr/current/default/core.hex
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/interrupts.c
~ /avr/current/zx.c
~ /avr/current/zx.h
~ /flasher/readme.txt

Rev 115 – added real matrix keyboard support

ddp — Sat, 06 Feb 2010 10:35:08 +0300

ddp – 6 file(s) modified
added real matrix keyboard support

~ /avr/current/default/core.hex
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/interrupts.c
~ /avr/current/zx.c
~ /avr/current/zx.h
~ /fpga/current/README

Rev 113 – new spi mapping and joystick support

chrv — Fri, 05 Feb 2010 00:02:14 +0300

chrv – 5 file(s) modified
new spi mapping and joystick support

~ /avr/current/default/core.hex
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/joystick.c
~ /avr/current/joystick.h
~ /avr/current/zx.h

Rev 110 – slave spi addressing changed, KJ port added (see spi_fmt.txt)

lvd — Thu, 04 Feb 2010 00:18:05 +0300

lvd – 12 file(s) modified
slave spi addressing changed, KJ port added (see spi_fmt.txt)

~ /avr/current/default/core.hex
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/zx.h
~ /fpga/current/quartus/pentevo.qws
~ /fpga/current/quartus/top.rbf
~ /fpga/current/quartus/top.sof
~ /fpga/current/slave/slavespi.v
~ /fpga/current/slave/spi_fmt.txt
~ /fpga/current/top.v
~ /fpga/current/vga/vga_double.v
~ /fpga/current/z80/zkbdmus.v
~ /fpga/current/z80/zports.v

Rev 100 – Switcher VGA/non-VGA on SCROLL LOCK. RTC some features (write/read NVRAM ...

chrv — Thu, 28 Jan 2010 23:44:25 +0300

chrv – 8 file(s) modified
Switcher VGA/non-VGA on SCROLL LOCK.
RTC some features (write/read NVRAM cells).

~ /avr/current/default/core.hex
~ /avr/current/default/top.rbf
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/rs232.c
~ /avr/current/rtc.c
~ /avr/current/rtc.h
~ /avr/current/zx.c
~ /avr/current/zx.h

Rev 94 – add wait ports processing

chrv — Thu, 28 Jan 2010 00:31:43 +0300

chrv – 12 file(s) modified
add wait ports processing

~ /avr/current/default/core.hex
~ /avr/current/default/top.rbf
~ /avr/current/default/ZXEVO_FW.BIN
~ /avr/current/interrupts.c
~ /avr/current/main.c
~ /avr/current/ps2.h
~ /avr/current/rtc.c
~ /avr/current/rtc.h
~ /avr/current/spi.c
~ /avr/current/spi.h
~ /avr/current/zx.c
~ /avr/current/zx.h

Rev 75 – support mouse and atx power supply

chrv — Sat, 23 Jan 2010 19:50:51 +0300

chrv – 10 file(s) modified
support mouse and atx power supply

+ /avr/current/atx.c
+ /avr/current/atx.h
~ /avr/current/interrupts.c
~ /avr/current/main.c
~ /avr/current/pins.h
~ /avr/current/ps2.c
~ /avr/current/ps2.h
~ /avr/current/rtc.h
~ /avr/current/zx.c
~ /avr/current/zx.h

Rev 71 – mouse: send to zx port release

chrv — Wed, 20 Jan 2010 00:18:53 +0300

chrv – 6 file(s) modified
mouse: send to zx port release

~ /avr/current/main.c
~ /avr/current/ps2.c
~ /avr/current/ps2.h
~ /avr/current/rs232.h
~ /avr/current/zx.c
~ /avr/current/zx.h