#ifndef __MAIN_H__
#define __MAIN_H__
/**
* @mainpage General program for ATMEGA128 ZX Evolution.
*
* @section history Revision history
*
* @subsection current Current version.
*
* - Fix RS232 (clear overrun error flag)
*
* @subsection ver_2012_02_13 Version 13.02.2011.
*
* - Add SD WRP and SD DET to C gluk's register.
* - Fix PS2 keyboard hangup.
* - Add some controls to C gluk's register.
* - Add access to PS2 keyboards log via gluk extensions.
*
* @subsection ver_2011_09_29 Version 29.09.2011.
*
* - Add support BCD or HEX format in emulation Gluk clock.
* - Fix RTS line control.
*
* @subsection ver_2011_06_11 Version 11.06.2011.
*
* - Add NMI button supporting.
* - Fix PS/2 mouse initialization.
*
* @subsection ver_2011_05_11 Version 11.05.2011
*
* - Direct load UBRR on RS232 mode [if (DLM&0x80)!=0 ].
* - Control PLL (ICS501M) via PE2,PE3. Set it to 2X.
*
* @subsection ver_2011_04_26 Version 26.04.2011
*
* - Add RS232 supporting.
* - Increase delay for reset FPGA (nCONFIG pin) before download it.
*
* @subsection ver_2011_04_02 Version 02.04.2011
*
* - Add access to 0..EF cells of PC8583.
* - Fix RTC PC8583 dayweek 0..6 convert to DS12788 dayweek 1..7 and vice versa.
*
* @subsection ver_2010_12_07 Version 07.12.2010
*
* - Keyboard mapping without using RAM.
* - Add setting resolution for PS/2 mouse [1..4].
* (left and right mouse buttons and pad'*' - default [1], pad'+' - increment, pad'-' - decrement).
* - Add PS/2 mouse resolution saving to RTC register.
*
* @subsection ver_2010_11_29 Version 29.11.2010
*
* - "NumLock" switch mode to beeper/pwm or tapeout ("NumLock" led light on tapeout mode).
* - Create full translation map (0x00-0x7f for extended scan codes).
*
* @subsection ver_2010_10_17 Version 17.10.2010
*
* - "F9","F10","F11" on PS/2 keyboard not used for reset function.
* - "F12" on PS/2 keyboard soft/hard reset. Short press (<5sec) - soft reset, long press (5sec) - hard reset.
* - "Ctrl-Alt-Del" on PS/2 keyboard reset ZX (hard reset). If all keys is mapped to ZX keyboard - function not work.
* - Create translation map (PS/2 to ZX keyboard) in eeprom (default in progmem).
* - Fix PS/2 mouse and keyboard send mode (without 'delay' function).
* - Support load from tape input.
*
* @subsection ver_2010_03_30 Version 30.03.2010
*
* - Fix fpga load and ZX part init (optimize).
*
* @subsection ver_2010_03_28 Version 28.03.2010
*
* - Fix PS/2 mouse error handler (analize error and reinit mouse if need it).
* - Add support for get version info (via Gluk cmos extra registers 0xF0..0xFF).
* - Optimize sources, some correction (log, fpga load).
* - Fix PS/2 timeout error handler.
*
* @subsection ver_2010_03_24 Version 24.03.2010
*
* - Fix Power Led behavior (it off while atx power off).
* - "Print Screen" PS2 keyboard key set NMI on ZX.
* - Soft reset (Z80 only) to service (0) page if pressed "softreset" key <5 seconds.
*
* @subsection ver_2010_03_10 Version 10.03.2010
*
* - Add PS2 keyboard led controlling: "Scroll Lock" led equal VGA mode.
* - Fix mapping gluk (DS12887) nvram to PCF8583.
* - Fix Update Flag in register C (emulation Gluk clock).
* - Add modes register and save/restore it to RTC NVRAM.
* - Add support for zx (mechanical) keyboard.
* - Add support for Kempston joystick.
*
* @subsection ver_2010_02_04 Version 04.02.2010 - base version (1.00 in SVN).
*
*/
/**
* @file
* @brief Main module.
* @author http://www.nedopc.com
*/
/** Common flag register. */
extern volatile UBYTE flags_register;
/** Direction for ps2 mouse data (0 - Receive/1 - Send). */
#define FLAG_PS2MOUSE_DIRECTION 0x01
/** Type of ps2 mouse (0 - classical [3bytes in packet]/1 - msoft [4bytes in packet]). */
#define FLAG_PS2MOUSE_TYPE 0x02
/** Ps2 mouse data for zx (0 - not ready/1 - ready). */
#define FLAG_PS2MOUSE_ZX_READY 0x04
/** Spi interrupt detected (0 - not received/1 - received). */
#define FLAG_SPI_INT 0x08
/** Direction for ps2 keyboard data (0 - Receive/1 - Send). */
#define FLAG_PS2KEYBOARD_DIRECTION 0x10
/** Version type (0 - BaseConf /1 - BootLoader). */
//#define FLAG_VERSION_TYPE 0x20
/** Last tape in bit value. */
#define FLAG_LAST_TAPE_VALUE 0x40
/** Hard reset flag (1 - enable hard reset). */
#define FLAG_HARD_RESET 0x80
/** Common extension flag register. */
extern volatile UBYTE flags_ex_register;
/** Ps2 mouse command (0 - not/1 - process). */
#define FLAG_EX_PS2MOUSE_CMD 0x01
/** Ps2 keyboard map (0 - default/1 - user). */
#define FLAG_EX_PS2KEYBOARD_MAP 0x02
/** NMI interrupt set (0 - not/1 - set). */
#define FLAG_EX_NMI 0x04
/** Common modes register. */
extern volatile UBYTE modes_register;
/** VGA mode (0 - not set/1 - set). */
#define MODE_VGA 0x01
/** Tapeout mode (0 - beeper or pwm mode/1 - tapeout). */
#define MODE_TAPEOUT 0x02
/** CAPS LED mode (0 - off/1 - on). */
#define MODE_CAPSLED 0x04
/** Type extensions of gluk registers. */
extern volatile UBYTE ext_type_gluk;
/** Type is baseconfiguration version. */
#define EXT_TYPE_BASECONF_VERSION 0
/** Type is bootloader version. */
#define EXT_TYPE_BOOTLOADER_VERSION 1
/** Type is PS2 keyboards log. */
#define EXT_TYPE_PS2KEYBOARDS_LOG 2
/** Data buffer. */
extern UBYTE dbuf[];
/** FPGA data index. */
extern volatile ULONG curFpga;
/**
* Writes specified length of buffer to SPI.
* @param size [in] - size of buffer.
*/
void put_buffer(UWORD size);
#endif //__MAIN_H__