Blame | Last modification | View Log | Download | RSS feed | ?url?
ifndef __reg6280inc ; avoid multiple inclusion
__reg6280inc equ 1
save
listing off ; no listing over this file
;****************************************************************************
;* *
;* AS 1.42 - File REG6280.INC *
;* *
;* contains SFR and Bit Definitions for ST6280 *
;* *
;* ST62T80B/E80B Data Sheet, Rev. 2.5, August 1999 *
;* *
;****************************************************************************
;----------------------------------------------------------------------------
; Memory Addresses
RAMSTART sfr 000h ; Start Address Internal RAM
; area 00h..3fh maps to two banks
; area 40h..7fh is ROM read window
RAMEND sfr 0bfh ; End Address Internal RAM
EESTART sfr 0000h ; Start Address EEPROM (two banks shared with RAM)
EEEND sfr 003fh ; End " "
segment code
ROMSTART label 0080h ; Start Address Internal ROM
ROMEND label 1fffh ; End " " ROM
;----------------------------------------------------------------------------
; Interrupt Vectors
ADC_vect label 0ff0h ; A/D End Of Conversion, shared with...
UART_vect label 0ff0h ; UART Interrupt
TIMER1_vect label 0ff2h ; Timer 1 Underflow, shared with...
ARTIMER_vect label 0ff2h ; AR Timer Overrflow/Compare, shared with...
OSC_vect label 0ff2h ; 32kHz OSC Interrupt
PORTA_vect label 0ff4h ; Ext. Interrupt Port A, shared with...
PORTB_vect label 0ff4h ; Ext. Interrupt Port B, shared with...
PORTC_vect label 0ff4h ; Ext. Interrupt Port C
SPI_vect label 0ff6h ; SPI Interrupt
NMI_vect label 0ffch ; Non Maskable Interrupt
RESET_vect label 0ffeh ; RESET
;----------------------------------------------------------------------------
; GPIO (irregular layout)
; NOTE: register overview lists ORB @ 0ceh, but later description says 0cdh,
; which makes more sense:
include "gpio.inc"
__defgpio "A",0c0h
DRB sfr 0c1h ; Port B Data Register
DDRB sfr 0c5h ; Port B Data Direction Register
ORB sfr 0ceh ; Port B Option Register
DRC sfr 0c3h ; Port C Data Register
DDRC sfr 0c6h ; Port C Data Direction Register
ORC sfr 0cfh ; Port C Option Register
;----------------------------------------------------------------------------
; CPU
include "ior.inc"
DRBR sfr 0cbh ; Data RAM Bank Register
DRBR6 bit 6,DRBR ; Map LCD RAM Page 2
DRBR5 bit 5,DRBR ; Map LCD RAM Page 1
DRBR4 bit 4,DRBR ; Map RAM Page 2
DRBR3 bit 3,DRBR ; Map RAM Page 1
DRBR1 bit 1,DRBR ; Map EEPROM Page 1
DRBR0 bit 0,DRBR ; Map EEPROM Page 0
EECTL sfr 0dfh ; EEPROM Control Register
E2OFF bit 6,EECTL ; Stand-by Enable Bit
E2PAR1 bit 3,EECTL ; Parallel Start Bit
E2PAR2 bit 2,EECTL ; Parallel Mode En
E2BUSY bit 1,EECTL ; EEPROM Busy Bit
E2ENA bit 0,EECTL ; EEPROM Enable Bit
;----------------------------------------------------------------------------
; Clock System
OCR32 sfr 0dbh ; 32kHz Oscillator Register
EOSCI bit 7,OCR32 ; Enable Oscillator Interrupt
OSCEOC bit 6,OCR32 ; Oscillator Interrupt Flag
S_S bit 5,OCR32 ; Oscillator Start/Stop Bit
;----------------------------------------------------------------------------
; Watchdog
include "wdg.inc"
DWDR sfr WDGR ; alternate name in older data sheets
;----------------------------------------------------------------------------
; Analog/Digital Converter
include "adc.inc"
;----------------------------------------------------------------------------
; Timer
include "timer.inc"
__deftimer 0d2h,""
TOUT1 bit 5,TSCR ; Timer Output Control
DOUT1 bit 4,TSCR ; Data Output
include "artimer.inc"
__defartimer 0e0h
;----------------------------------------------------------------------------
; UART
include "uart.inc"
;----------------------------------------------------------------------------
; SPI
SDSR sfr 0ddh ; SPI Data/Shift Register
SIDR sfr 0c2h ; SPI Interrupt Disable Register
;----------------------------------------------------------------------------
; LCD Controller
LCDCR sfr 0dch ; LCD Mode Control Register
MUX16 bit 7,LCDCR ; Multiplexing Ratio Select
MUX11 bit 6,LCDCR
HF bfield LCDCR,3,3 ; Oscillator Select
LF bfield LCDCR,0,2 ; Base frame Frequency Select
restore
endif ; __reg6280inc